DIY Sewing Stretch Fabric Tutorial

/
/
/
61 Views
DIY Sewing Stretch Fabric Tutorial
DIY Sewing Stretch Fabric Tutorial
DIY Sewing Stretch Fabric Tutorial
  • Use a ball point needle.
  • Check your sewing machine manual for a “stretch stitch”.
  • Use a Serger machine for seams. If you don’t have a Serger, use the Zigzag stitch.
  • Make sure your fabric is free of wrinkles when cutting out pattern pieces.
  • Cut directly on top of fabric, without lifting the fabric as you go. Use a rotary cutter, if you can.
  • Start with skirts and scarves, work your way up to patterns with sleeves.

1. Cut Fabric 12.5 inches x 34 inches.

2. With right sides together serge the fabric into a tube. If you don’t own a Serger, use your zigzag stitch. Turn tube inside out.
3. Tie a knot in the middle of the tube.
4. Whip stitch three of the four layers together from edge to edge, knot and cut off.
5. (You can see here what the finished whip stitch will look like on the inside) Take the remaining loose layer and flip it over the stitched three layers. Tuck the raw edge under and blind stitch to the turban. The layer should lay right side to right side and stitches should be completely invisible once finished.
6. Enjoy your new turban! It’s easy to wear with your hair up or down.
This div height required for enabling the sticky sidebar
Ad Clicks : Ad Views : Ad Clicks : Ad Views :